Thermoworks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual download pdf (Page 37)

Chapter 4 Preparing LogTag(s) for use 35

ticks in both boxes next to the "After X consecutive alert readings" and "After X alert

readings have occurred".

2. You can not enter a number into the "After X consecutive alert readings" field which is

larger than the number in "After X alert readings have occurred", since the latter alert

condition would always be met first.

3. Similarly, you can not enter a number into the "After X alert readings have occurred"

field which is smaller than the number in "After X consecutive alert readings". The

software will adjust field values as appropriate.

Advanced Alert Settings

Some LogTags support more detailed alert settings than described before. If LogTag

Analyzer encounters one of these loggers, an additional

button is visible in

the bottom left of the configuration screen.

When this button is pressed, the alert configuration screen changes and displays

additional settings:

The red alert indicator can now be configured independently for upper and lower alert

values.

Function Purpose

Readings above X

Readings below Y

In addition to entering the threshold levels tick the boxes next to

"Readings above" or "Readings below" to enable the alert

conditions for only the upper or only the lower threshold

settings, or for both. If both boxes are ticked, the behaviour is

the same as for the standard alert settings. The charts will

display alert readings according to the settings made in the

Charts

section of the 'Options' Screen.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 163 164

No comments

Thermoworks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual Page 37