Thermoworks RTR-500GSM WIRELESS LAN OR GSM (CELLULAR) LOGGERS User Manual

RTR-500GSM Configuration Guide First Things First Ver. 1.11 I) A Note About User Documentation In order to avoid a thick and complicated manual, mo

of having an XML file with the readings included as an attachment. The next choice is to send via FTP. This will result in an XML file with the Curr

10 Send Recorded Data Settings This is the screen where downloads of the data recorded by the loggers are enabled, the frequency of downloads is spec

Setting the RTR-500GSM to Run Once you have completed making all the settings, unplug the USB cable from the RTR-500GSM. When you are ready to depl

*Determining E-Mail Authentication Type This procedure can be used with many E-Mail servers to determine what authentication will be accepted. 1)

Getting Started I) Connect the RTR-500GSM to your PC First make sure the Run / Stby switch is in the Stby position and plug in the A/C adapter. N

Initial Settings Wizard The Initial Settings Wizard allows you to quickly enter the basic information needed to connect through the cellular system

Test Message Failures If your test SMS Transmission completed successfully you can skip this section. If it did not, however, you will most likely

The RTR-500GSM Settings Window I) The Settings Process Making settings to control the operation of the RTR-500GSM is a remarkably straightforward

2 Remote Unit Settings The Remote Unit Settings screen is used to register Loggers to the system. When a Logger is placed on the 500GSM you can se

4 Wireless Route Settings In this screen we can see that this system has two Loggers and one Repeater registered. Initially after registration the s

5 Clock Settings This is the screen where you set the RTR-500GSM’s internal clock. You can set the current time to match your PC or to another time,

A Note About Free E-Mail Service: Some of the most popular free e-mail services, such as Gmail and Hotmail, use SSL encryption, which the RTR-500W do